AP Racing by Essex Radi-CAL Heavy-Duty Competition Brake Kit (Front CP9668/390mm D62)- S550 S650 Ford Mustang Dark Horse & GT
13.01.10211
Complete front AP Racing by Essex Radi-CAL Heavy Duty Competition Brake Kit for 2024+ S650 Ford Mustang Dark Horse and GT (including Performance Pack) & S550:
Developed around Essex-designed D62 radial depth brake pads to provide extra heat capacity, longevity, and fade resistance
Saves approximately 25 unsprung lbs. on front axle vs. OE Dark Horse brakes
Clears OE 19x10.5" ET24 Dark Horse Handling Pack front wheel without a spacer
Features AP Racing CP9668 Radi-CAL Pro5000R six piston calipers that use 25mm (1 inch) thick pads
Must use Ferodo Racing D62 pads - Essex part# 11.00.00003 (DS3.12 track) or 11.00.00004 (DS2500 dual-purpose)
Heavy Duty 390x36mm, 72 vane AP Racing J Hook discs with larger swept area to match the pad radial depth of 62mm
Every component designed to resist the heat of extended track sessions
Pistons sized properly to allow for seamless integration with OEM master cylinder and ABS system
Works best with our Essex/AP Racing CP9451-365mm Competition Rear Brake Kit
Note: if upgrading the front kit only and keeping OE rear brakes, it is important to run a brake pad on the rear axle with a lower friction level than the front to preserve proper brake balance
Developed around Essex-designed D62 radial depth brake pads to provide extra heat capacity, longevity, and fade resistance
Saves approximately 25 unsprung lbs. on front axle vs. OE Dark Horse brakes
Clears OE 19x10.5" ET24 Dark Horse Handling Pack front wheel without a spacer
Features AP Racing CP9668 Radi-CAL Pro5000R six piston calipers that use 25mm (1 inch) thick pads
Must use Ferodo Racing D62 pads - Essex part# 11.00.00003 (DS3.12 track) or 11.00.00004 (DS2500 dual-purpose)
Heavy Duty 390x36mm, 72 vane AP Racing J Hook discs with larger swept area to match the pad radial depth of 62mm
Every component designed to resist the heat of extended track sessions
Pistons sized properly to allow for seamless integration with OEM master cylinder and ABS system
Works best with our Essex/AP Racing CP9451-365mm Competition Rear Brake Kit
Note: if upgrading the front kit only and keeping OE rear brakes, it is important to run a brake pad on the rear axle with a lower friction level than the front to preserve proper brake balance
Pricing:
$6,699.00
Description
One pair AP Racing CP9668 Radi-CAL Pro5000R six piston calipers
One pair 390x36mm AP Racing, 72 vane, J Hook racing discs, with fully floating 6061 hard anodized aluminum hats, and attachment hardware
One pair caliper mounting brackets and hardware
One pair Spiegler Stainless Steel Brake Lines with abrasion resistant coating
Detailed installation instructions
Brake pads are NOT included with our system. Racing brake pads are a highly personal choice. Many manufacturers include a set of inexpensive, low quality pads with their brake kits. Rather than artificially inflating the price of our system with a set of pads you probably don't want anyway, we've decided to remove the cost from our system and allow our customers to choose the pads that best suit their needs/wants. When purchasing our kit, you are able to choose one set of front pads at a substantial discount vs. the retail price. Please use the drop-down menu to select your pads.
Pad Tension Clips (frequently referred to as anti-rattle clips) are NOT included with our Competition Kits, but we do offer them as an option if you're concerned about NVH. One of the great benefits of the AP Racing calipers in our system is that they are designed to accommodate pads from a wide range of manufacturers. Each manufacturer builds their pads with specifications that are slightly different. As such, pads from different manufacturers, or even from different batches, won't always fit in the calipers in exactly the same manner. Some pads are a snug fit, while others may rattle around and produce noise. The Essex Designed Pad Tension Kit is designed to dramatically reduce pad movement inside the caliper, along with just about all resulting noise. Click here to add the pad tension kits for the CP9668 calipers in this brake kit to your shopping cart. Please note that each caliper requires one Pad Tension Kit. If you need enough tension blocks for both of your calipers, you need to order two of these kits!
One pair 390x36mm AP Racing, 72 vane, J Hook racing discs, with fully floating 6061 hard anodized aluminum hats, and attachment hardware
One pair caliper mounting brackets and hardware
One pair Spiegler Stainless Steel Brake Lines with abrasion resistant coating
Detailed installation instructions
Brake pads are NOT included with our system. Racing brake pads are a highly personal choice. Many manufacturers include a set of inexpensive, low quality pads with their brake kits. Rather than artificially inflating the price of our system with a set of pads you probably don't want anyway, we've decided to remove the cost from our system and allow our customers to choose the pads that best suit their needs/wants. When purchasing our kit, you are able to choose one set of front pads at a substantial discount vs. the retail price. Please use the drop-down menu to select your pads.
Pad Tension Clips (frequently referred to as anti-rattle clips) are NOT included with our Competition Kits, but we do offer them as an option if you're concerned about NVH. One of the great benefits of the AP Racing calipers in our system is that they are designed to accommodate pads from a wide range of manufacturers. Each manufacturer builds their pads with specifications that are slightly different. As such, pads from different manufacturers, or even from different batches, won't always fit in the calipers in exactly the same manner. Some pads are a snug fit, while others may rattle around and produce noise. The Essex Designed Pad Tension Kit is designed to dramatically reduce pad movement inside the caliper, along with just about all resulting noise. Click here to add the pad tension kits for the CP9668 calipers in this brake kit to your shopping cart. Please note that each caliper requires one Pad Tension Kit. If you need enough tension blocks for both of your calipers, you need to order two of these kits!
Details
- 13.01.10211
- 13.01.10211
- AP Racing
- New
Categories
- Ford - Mustang - Mustang GT
Shipping Information
- Item Requires Shipping
- 50.0 lbs.
- W16.0000” x H16.0000” x L14.0000”
- Free FedEx / UPS Ground Shipping!
Customer Reviews
Total Reviews (0)
You must login to post a review.
Write the First Review!