AiM SmartyCam3 Corsa 2m 67° Lens

The SmartyCam 3 Corsa is a solid-state digital video camera that can be used as a stand-alone camera or connected to an AiM data logger for brilliant videos with data overlay. All of the information from the data logger can be overlaid on screen and recorded as part of the video footage -- no syncing necessary later.

As a stand-alone camera, the SmartyCam 3 Corsa records brilliant, wave-free 1920x1080P HD 60 FPS racing videos. Connect the SmartyCam 3 to an AiM data logger (anything from a Solo2 DL or MyChron5 to an EVO5 logger) and you can expand the overlay to include information from those sources. When connected to a GPS Module (sold separately) or GPS-enabled logger, the GPS data gets embedded in the video file as well. When you import the data file and the video file into RaceStudio 3, the two files will automatically sync so you can see WHAT happened, exactly WHEN it happened. No more guessing about whether the driver caused something to happen, or if the driver reacted to something happening!

Records true HD video to your SD memory card (not included; supports up to 2 TB cards). Battery lasts less than 20 minutes, so connection to a logger or vehicle power is required*. Waterproof for use on open cars, motorcycles, and personal watercraft. The wide 84° field of view is great for open vehicles, or for mounting to the windshield in a sedan. The built-in rear-facing preview screen makes aiming the camera easy. The improved sapphire glass lens (similar to a watch crystal) is much harder than the glass used on previous generations for greater resistance to rock chips. A standard 1/4-20 female thread on the bottom accepts any standard camera mount (sold separately).

Weighs only 9.9 oz (280g) including battery. Measures 4" Wide x 2 1/2" High x 1 7/8" deep including lens (102mm W x 63mm H x 47mm D)**. Three 712-Type (screw-in) ports on the back: 7-pin "ECU-Mic" (for direct connection to an ECU, an external microphone, and/or external power), 5-pin "Exp" (for connection to an AiM logger, external power, or for charging the internal battery), 5-pin "GPS" (accepts standard GPS09 Module, not included).

Each kit includes SmartyCam 3 Corsa with the wide 84° angle lens, internal microphone, and built-in battery; your choice of 2 meter of 4 meter CAN "Exp" cable (5 pin to 5 pin)*; USB-C download cable; and 5-pin 712-type (screw-in) AC charging adapter (North American plug type). Does not include memory card or camera mount. Race Studio 3 software is always available as a free download from AiM.

*For stand-alone use, the CAN cable may be modified for direct connection to vehicle DC power.
**Our measurements include the knob on the side which seals the memory card door and the front lens. Case alone measures 94mm W x 63mm H x 31mm D.