19x12" ET46 APEX VS-5RS Forged Porsche Center Lock Wheel
VS5RS1912ET46-CL-PS
As part of our forged Sprint™ line, the VS-5RS was built to be extremely light while still offering a meaningful strength increase over our flow formed wheels. Engineered for drivers looking to shed as much weight as possible to improve lap times.
Priced per wheel
Priced per wheel
Pricing:
$949.00
Description
Vehicle Covered in this Guide
2014-2016 991.1 and 2018-2019 991.2 Porsche GT3
Brake Clearance Information
In the engineering phase of wheel development we 3D scan factory brakes and review 2D aftermarket brake templates in order to optimize our barrel profiles and spoke curvatures. As a result, our wheels offer massive brake clearance so you can run the smallest possible wheel diameter.
* The factory 6 piston 410mm PCCBs require 20" wheels for proper clearance. Read our article for more info.
Rear Lower Control Arm Bolt Modification - Required for 19" Wheels
If you have steel brakes, downsizing to a 19" wheel and tire package is advantageous for many reasons including a reduction in weight and an increase in tire options. By decreasing the diameter of the wheels, the inner barrel of the rear wheels get quite close to the factory lower control arm "stabilizer bolt". To improve clearance, we recommend replacing the stock hex head bolts with Porsche 72mm pan head bolts - part # 999-073-530-01 which are under $10.
Please use the following link to see which tire and fitment suits your needs:
https://support.apexraceparts.com/hc/en-us/articles/4473214756891-991-911-GT3-Wheel-Tire-Fitment-Guide
2014-2016 991.1 and 2018-2019 991.2 Porsche GT3
Brake Clearance Information
In the engineering phase of wheel development we 3D scan factory brakes and review 2D aftermarket brake templates in order to optimize our barrel profiles and spoke curvatures. As a result, our wheels offer massive brake clearance so you can run the smallest possible wheel diameter.
* The factory 6 piston 410mm PCCBs require 20" wheels for proper clearance. Read our article for more info.
Rear Lower Control Arm Bolt Modification - Required for 19" Wheels
If you have steel brakes, downsizing to a 19" wheel and tire package is advantageous for many reasons including a reduction in weight and an increase in tire options. By decreasing the diameter of the wheels, the inner barrel of the rear wheels get quite close to the factory lower control arm "stabilizer bolt". To improve clearance, we recommend replacing the stock hex head bolts with Porsche 72mm pan head bolts - part # 999-073-530-01 which are under $10.
Please use the following link to see which tire and fitment suits your needs:
https://support.apexraceparts.com/hc/en-us/articles/4473214756891-991-911-GT3-Wheel-Tire-Fitment-Guide
Details
- VS5RS1912ET46-CL-PS
- VS5RS1912ET46-CL-PS
- Apex Wheels
- New
Categories
Shipping Information
- Item Requires Shipping
- 21.7 lbs.
- W22.5000” x H22.5000” x L14.0000”
- Free FedEx / UPS Ground Shipping!
- This item ships in its own box.
Customer Reviews
Total Reviews (0)
You must login to post a review.
Write the First Review!