Shop With Confidence: Shipping Info / Guaranteed Returns
Click on image to zoom

Stoptech AeroRotor 2-piece Rotors S2000 Front Left 

129.40048.14
AeroRotor™ Slotted Vented 2-Piece Front Passenger Side Brake Rotor (129.40048.14) by StopTech®. Quantity: 1 Per Pack. StopTech® AeroRotor® Replacement Kits (ARK) are designed to replace your vehicle's original factory rotors, while retaining the factory brake calipers. Although the ARK is the same diameter and thickness as the factory rotors, it offers improved cooling, braking, and handling. more details on - https://www.carid.com/stoptech/aerorotor-slotted-2-piece-front-passenger-side-brake-rotors-mpn-129-40048-14.html
Pricing: $444.05
Qty:
Free FedEx / UPS Ground Shipping!

Description

Features:
Specifically engineered and patented AeroVanes for optimum cooling
Patented, billet 7075 aluminum AeroHats for improved airflow
Full-floating mounting hardware to eliminate pad knock-back
Optimized to provide even performance and consistent feedback
Hard-anodized hats are impervious to color change or fading
Stainless steel studs secured with set screws for strength and durability
Fully machined aluminum or steel that is precise and strong
Application specific design for precise and proper fitment
All necessary hardware for easy installation
Patented design with directional stand offs between the rotor and mounting bell
Increases airflow by 50%-100% over traditional 2-piece designs
Increased airflow reduces the temperature difference between the inside and outside rotor faces
Results in less distortion and better performance compared to other fully floating designs
Outer pad wear is reduced
Proudly made in the USA
Benefits:

Slots reduce stopping distances in wet weather
Slots help to increase pad bite and improve air circulation
Slots create an escape route for debris, dust, gases, and water
Slots clean and de-glaze pad surface for optimum pad coefficient of friction
Vented type of rotors offers much faster heat dissipation
The directional, floating AeroRotors allow independent expansion of the rotor and hat without "coning," thanks to elongated drive pin holes. ARK components include AeroRotor friction rings with patented internal vane design, pre-assembled to billet aluminium AeroHats with directional stand-offs that optimize cooling airflow. The patented AeroRotor vane design pushes up to 80% more air than factory rotors for better cooling and reduced fade on the track.

The aircraft-grade aluminum hats and 2-piece AeroRotors are up to 8 pounds lighter than stock rotors, allowing faster acceleration and deceleration, and improved handling. StopTech AeroRotors are available slotted or cross-drilled. These slots or holes allow better dissipation of heat, friction material and debris, assuring that fresh pad material is in contact with the rotor every time the brakes are applied. An optional anti-corrosion, zinc finish is available for customers in cold climates, where salt and chemicals are used to melt snow and ice. The zinc coating also benefits customers who prefer no visible surface rust on the vanes and outer circumference of the rotors. StopTech AeroRotors are 100% made in the USA.

The patented 2-piece AeroRotor assembly uses uniquely designed and patented AeroVanes® inside the disc to optimize airflow through the rotor. This improved directional design minimizes turbulence and flows up to 61 percent more air than any other rotor tested. The result is up to 80 percent better airflow over original equipment rotors and 10-30 percent better airflow than other directional vane racing rotors currently available. Better airflow equals better cooling, and better cooling means less fade and better overall brake system performance. StopTech AeroRotors also feature a proprietary alloy chemistry. By adding molybdenum to the gray iron, carefully targeting a narrow range of hardness and tensile strength values, and controlling the cooling rate of the rotor after casting, StopTech produces a friction ring with added crack resistance as well as improved functionality.

Super strong Inconel® drive pin washers - as used in aircraft engines and other racing applications - are practically impervious to oxidation or corrosion even at extreme temperatures. Street rotors use a curved drive pin washer to add tension to the hat assembly, reducing rattle. Race applications use a flat washer that allows full freedom of movement between hat and friction ring. StopTech AeroHats feature directional stand offs to further improve airflow and cool the rotor.

Elongated drive pin slots allow separate expansion of rotor and hat to resist coning. Tapered slots allow evacuation of debris that might otherwise accumulate with straight-cut slots. Drive pins used to affix the hat to the rotor have a slightly out-of-round hole and are self-locking. They withstand high temperatures much better than typical lock washers and allow drive pins to move freely, yet securely, as hat and rotor expand at different rates.

In certain applications where packaging is an issue - such as on the Chevrolet Corvette - StopTech uses slant-head drive pins to provide improved clearance as pads wear.

StopTech® has been awarded the highly coveted TÜV approval on several big brake kits. StopTech kits successfully passed TÜV’s demanding series of tests that range from performance and durability, to proper fitment and ease of installation. Although TÜV certification is not required in all countries, TÜV approval demonstrates that StopTech’s Balanced Brake Upgrades meet the rigorous standards set by this respected German Agency. StopTech Big Brake Kits have been awarded a Teilgutachten. The complete kit is certified to run on a particular application, so customers do not need to pay for further testing with the TÜV agency.

more details on - https://www.carid.com/stoptech/aerorotor-slotted-2-piece-front-passenger-side-brake-rotors-mpn-129-40048-14.html

Features

Real Value – Quality Replacement Rotors That Offer More Features Than Just a Great Price

All Centric premium brake components are engineered and manufactured using stringent, well-proven production processes and parts that pass the stringent quality assurance standards of O.E. manufacturers as well. Additionally, Centric's in-house engineering department analyzes each part to ensure proper performance and fitment for every application (import and domestic). This attention to detail guarantees that Centric parts will perform as good as or better than the factory original.

Centric Premium Plain 120 Series Rotors feature an Electrocoating (E-coating) finish that provides long lasting corrosion protection. Unlike phosphate finishes that provide only minimal protection from the elements, E-coating is a superior electrostatically applied finish designed to withstand 400 hours of salt water exposure without rusting.

Double Disc Ground

Centric Premium Plain 120 Series Rotors are double disc ground with a taper-free finish. Double disc grinding ensures parallelism, eliminates run out and provides near perfect disc thickness variation (DTV). Double disc grinding leaves a non-directional finish on the friction surface area for more effective pad-rotor break in.

Machined Finishes

Centric Premium Plain 120 Series Rotors feature 100% fully machined finishes including rotor hats. This extra process provides better rotor balance and creates a cleaner, more finished looking component. Additionally, all Centric rotors are inspected for balance and mill-corrected to a tolerance of less than 2 oz. per inch

Split Castings

Center-split core castings provide proper heat transfer and thermal efficiency, resulting in superior braking power and safety.

Mill Balancing

Centric Premium Plain 120 Series Rotors are mill-balanced to a tolerance of less than 2 oz. per inch. This additional machining operation reduces the feedback associated with rotor vibration and provides a smooth, confident application of braking force.

Details

Shipping Information

  • Item Requires Shipping
  • 15.0 lbs.
  • W14.0000” x H2.0000” x L14.0000”
  • Free FedEx / UPS Ground Shipping!

Customer Reviews

Comment Total Reviews (0)

Write the First Review!

You must login to post a review.