Shop With Confidence: Shipping Info / Guaranteed Returns
Additional Images

Arai GP-6PED M6 SAH-2015

GP-6PED M6 SAH-2015
Simply put, it’s hard to imagine a better racing helmet. Combine Arai’s proprietary, groundbreaking PBcLc (Peripherally Belted Complex Laminate) shell construction -- the same shell shape as the F-1-grid’s GP-6RC model; a wider eye port for optimized peripheral vision; new ventilation; and on and on – and you get the striking new Arai GP-6(PED). The new shell gives you incredible strength and flexibility, and that strength allows Arai to use an extremely soft EPS liner that’s so comfortable it’ll make you think more about a nap than a race. Right until you strap in, that is. The cheek pads are replaceable for a more personal fit. Up top, the ventilation system is greatly improved with three larger, closeable intake vents, plus two larger exhaust cowls.

Now Snell SAH2015 certified, with the M6 washer/nut installed at the factory. With the 6mm washer/nut installed, anyone can now easily install a variety of Head and Neck Restraint systems that use a 6mm bolt to their helmet. This helmet also comes with the FIA-8858-2010 certification sticker applied to the interior liner of the helmet.
Pricing: $1,799.95

Customize Your Item

- Choose your size -
 * required
Qty:
Free FedEx / UPS Ground Shipping!

Features

Positive-Lock Shield
  • Positive shield lock mechanism provides Solid latchin, while allowing normal operation of the shield.
  • Designed to be an integral component of the shield system and function, not just an add-on afterthought.
  • The simplicity of the function masks the complexity of the design.


  • New Shield Pivot Hardware
  • New shield pivot hardware improves aerodynamics.
  • Type "6" 3mm shield


  • Wider Eyeport
  • Wider eye port for increased peripheral field of view


  • Ventilation
  • Large, closeable, intake vents combined with larger 10mm holes greatly increase air intake.
  • Larger 10mm rear vent holes, with larger cowls, increases airflow even further.


  • New Chinbar
  • Newly sculpted chin bar and ridge along lower edge of shell to improve structural integrity
  • Provides a stronger shell near the opening where it is needed as well as lowers the Center of Gravity.
  • Rise in shell above the shoulders for added clearance
  • M6 Anchor Type

  • Integrated seats to accommodate a variety of Head and Neck Restraint devices.
  • Pre-Installed M6 threaded washer/nut, with 6mm threads, to accept a variety of anchors systems for a variety of Head and Neck Restraint devices and make installation much easier for people not familiar with such installations
  • Flat surface area around the mounting nut to allow the anchor post base to rest flush with the helmet surface around the entire perimeter of the anchor base
  • FIA-8858-2010 certification sticker applied to the interior liner material
  • Details

    • GP-6PED M6 SAH-2015
    • GP-6PED M6 SAH-2015
    • Arai
    • New

    Shipping Information

    • Item Requires Shipping
    • Free FedEx / UPS Ground Shipping!

    Customer Reviews

    Comment Total Reviews (0)

    Write the First Review!

    You must login to post a review.